Technical Data - Uponor Smatrix Base PRO Guía Rápida

Ocultar thumbs Ver también para Smatrix Base PRO:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53

4 Technical data

General
IP
Max. ambient RH (relative humidity)
Thermostat
CE marking
ERP (thermostat only)
Low voltage tests
EMC (electromagnetic compatibility requirements) tests
Power supply
Voltage
Operating temperature
Storage temperature
Connection terminals (T-143, T-144, T-145, T-146, and T-148)
Connection terminals (T-141 and T-149)
Interface
CE marking
Low voltage tests
EMC (electromagnetic compatibility requirements) tests
Power supply
Operating temperature
Storage temperature
Controller/interface SD card
Type
Capacity
Speed
Controller X-147, X-148
CE marking
ERP
Low voltage tests
EMC (electromagnetic compatibility requirements) tests
Power supply
Internal fuse
Operating temperature
Storage temperature
Maximum consumption
Pump and boiler relay outputs
General purpose input (GPI)
Heat pump input
Heat pump output
Valve outputs
Power connection
Connection terminals for power, pump, GPI and boiler
Connection terminals for bus communication
Connection terminals for valve outputs
*) EN 60730-1 Automatic electrical controls for household and similar
use -- Part 1: General requirements
Value
IP20, class III (IP: degree of inaccessibility to active parts of the product
and degree of water)
85% at 20 °C
Value
IV
EN 60730-1* and EN 60730-2-9***
EN 60730-1
From room controller
4.5 V to 5.5 V
0 °C to +45 °C
-10 °C to +70 °C
0.5 mm² to 2.5 mm²
0.25 mm² to 0.75 mm² solid, or 0.34 mm² to 0.5 mm² flexible with ferrules
Value
EN 60730-1 and EN 60730-2-1
EN 60730-1
230 V AC +10/-15%, 50 Hz in wall box or mini USB connection
0 °C to +45 °C
-20 °C to +70 °C
Value
micro SDHC, UHS or Standard
4...32 GB, FAT 32
Class 4...10 +
Value
VIII
EN 60730-1* and EN 60730-2-1**
EN 60730-1
230 V AC +10/-15%, 50 Hz or 60 Hz
T5 F3.15AL 250 V, 5x20 3.15A quick acting
0 °C to +45 °C
-20 °C to +70 °C
45 W
230 V AC +10/-15%, 250 V AC 8 A maximum
Only dry contact
12 – 24 V DC/5 – 20 mA
5 – 24 V DC/0.5 – 10 mA, current sink ≤ 100 mW
24 V AC, 0.2 A average, 0.4 A peak
1 m cable with europlug (except UK)
Up to 4.0 mm² solid, or 2.5 mm² flexible with ferrules
0.5 mm² to 2.5 mm²
0.2 mm² to 1.5 mm²
**) EN 60730-2-1 Automatic electrical controls for household and
similar use -- Part 2-1: Particular requirements for electrical controls
for electrical household appliances
Uponor Smatrix Base PRO
EN
|
Quick guide
|
11
Tabla de contenido
loading

Tabla de contenido