Stereo Mode - LD Systems MEI1000G2 Manual De Usuario

7
LOCKING THE RECEIVER
Press the SET button repeatedly until "LIMITER" appears in the display and flashes. Using the
disable (limiter OFF) the limiter.
8
8
BATTERY CHARGE STATUS
The charge status of the batteries is shown in four stages. In addition to the fourth stage (no bars on the battery symbol) the red LOW
BATT LED will light up next to the display. The batteries should now be replaced immediately.
RECEIVER PROGRAMMING
1
+
1 2

STEREO MODE

Select the stereo mode for the transmission of a stereophonic audio signal. Press the SET button repeatedly until "FO OFF" or "FO ON"
appears in the display and flashes. Using the
input signals of the transmitter can be heard through headphones (on the left and right) connected to the receiver
On the receiver, the balance between the two input signals can be set with the help of the
ble : using the button, the centre location of a stereo signal can be changed by 15 levels to the right (1-, 2-, 3-, 4-, 5-, 6-, 7-, 8-, 9-,
A-, b-, C-, d-, E-, F-) and by 15 levels to the left (-1, -2, -3, -4, -5, -6, -7, -8, -9, -A, -b, -C, -d, -E, -F). To bring the centre location of
a stereophonic audio signal to the centre of the stereo base, please select the -0- setting. To ensure the transmission of a stereo audio
signal in the stereo mode, both the transmitter and the receiver have to be in stereo mode and an audio signal has to be present at the
INPUT LEFT and RIGHT entrances. When the transmitter is in mono mode, only the audio signal (INPUT RIGHT) is being transferred.
3
3 + 4
FOCUS MODE (ALSO KNOWN AS „DUAL MONO")
Select the Focus mode in order to listen to two mono signals in the centre of the panoramic field, and to customize their volume.Example
Rock Band (user is the lead singer): the first mono audio signal comprises a mix of drums, bass and guitar (the mixer is fed by a monitor
signal 1). The second mono audio signal contains the microphone signal of the singer (the mixer is fed by monitor signal 2). The singer
can now directly adjust the volume balance between the instruments and his voice and the overall volume level.
Press the SET button repeatedly until "FO OFF" or "FO ON" appears in the display and flashes. Using the
activate the Focus mode (FO ON).
In Focus mode the two input signals of the transmitter are mixed together and played back in mono. The user can now directly adjust
the volume balance of the signals
transmitter (INPUT RIGHT) into the background, use the button
F-). The volume balance is changed in favour of the audio signal at the left input (INPUT LEFT) of the transmitter.
12
2
buttons, you can now activate the stereo mode (FO OFF). In stereo mode, the two
4
by up to 31 levels with the help of the buttons on the receiver To push the mono signal of the
(15 levels: FOC 1-, 2-, 3-, 4-, 5-, 6-, 7-, 8-, 9-, A-, b-, C-, d-, E-, max.
button, you can enable (Limiter ON) or
buttons. A total of 31 levels are availa-
buttons, you can now