Oase biOrb EARTH Instrucciones De Uso página 35

Commissioning/start-up
How to proceed:
1. Fill the liquid reservoir (→ Filling the liquid reservoir).
2. Switch on the unit (→ Switching on the unit).
3. Install the "OASE Control" app (→ Connecting the unit with your smartphone/tablet).
4. If you have not already done so, create an OASE account in the app.
5. Use the app to configure the biOrb EARTH.
Filling the liquid reservoir
The liquid reservoir must be filled sufficiently to permit the mist and rain function. The mist and
rain function is deactivated automatically if the liquid level is too low.
The LED flashes blue if there
is insufficient liquid.
NOTE
We recommend only using "biOrb Humidimist" (→ Accessories) to fill the liquid reservoir. It con-
tains the required electrolytes for the organisms in the unit and prevents limescale deposits on
the glass, rain nozzles and mist generator.
After filling the liquid reser-
voir, press the button to
acknowledge the message.
The "OASE Control" app will
also notify you of a lack of
liquid and it is possible to
acknowledge this message in
the app.
EN
BOB0334
BOB0334
35