skilsaw SPT5007-EA Manual De Instrucciones página 10

ATTACHING THE FRONT PART
• Ensure that the wave washer and the sealing
ring are properly seated on the front locking
bolt (Fig . 8a) .
• Thread the front locking bolt into the opening
of the front knob on the early entry attach-
ment (Fig . 8c) .
• Align the front locking bolt with its mounting
opening in the saw and first tighten the bolt
by hand, then further tighten 1/2 turn using
T25 torx bit (Fig.8b). Do not overtighten.
Assembly
FIG. 8a
FIG. 8b
Front
locking bolt
FIG. 8c
Front
locking
bolt
-10-
Wave washer
Sealing ring
Front knob
Mounting
opening