Unold 48946 Instrucciones De Uso página 23

not be made from fruit juice. The
acid can result in damage.
4. Push the ice container back into
the appliance.
5. Select the desired ice cube size.
You can choose from the following
sizes:
ƒ Large ice cubes with a dia-
meter of approx. 3 cm
ƒ Medium
diameter of approx. 2 to 3 cm
ƒ Small ice cubes with a dia-
meter approx. 1.5 to 2 cm
6. To select the size, press the "Ice
cube size" button (8) until the
indicator lamp lights up green at
the desired size.
7. Press the "Start" button (6).
8. The appliance starts making ice
cubes. The first ice cubes that are
made do not have the selected
size, since it takes several minu-
tes before the appliance reaches
the right operating temperature.
Therefore, the first ice cubes are
somewhat smaller.
9. When the ice container is full, the
symbol (9) lights up red.
All manuals and user guides at all-guides.com
ice cubes with a
10. The appliance automatically stops
making ice cubes.
11. Remove the ice container and
empty it. Insert the ice contai-
ner back into the appliance. If
you wish to restart the appliance,
press „STOP" and then „START".
12. Please note that you have to hold
the ice container slightly slanted
when inserting it in the appliance.
13. The ice cube maker automatically
checks the water level in the water
tank. When the ice container is
full, the display (10) lights up.
14. The appliance automatically stops
making ice cubes. Add water. As
soon as enough water has been
added, the process continues
automatically.
15. You can interrupt the making of
ice cubes any time by pressing
the "Stop" button (7).
16. Once you have stopped making
ice cubes, remove the ice contai-
ner and empty it. Drain any remai-
ning water from the appliance as
described in the section "Drai-
ning water".
17. Please remember not to leave the
ice cubes in the ice container too
long, since they will start to melt.
If you do not wish to use the ice
cubes right away, you can store
them in the freezer.
18. After use, please leave the ice
cube maker open to prevent the
formation of mold or bacteria.
19. The water must be changed after
24 hours at the latest, for reasons
of hygiene.
23