Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
Command
Increase
presetting value
Decrease
presetting value
New presetting and kv-value are shown in display and are
immediately used for flow calculation
How to change presetting during measurement:
Operation
Command
Increase
presetting value
Decrease
presetting value
New presetting and kv-value are shown in display and are
immediately used for flow calculation
4.2 Flow Measurement after Direct Input
of kv-value
The process is similar as described above. However, instead
of selecting a valve option "Direct kv input" is selected.
How to access direct kv-input option:
Operation
Stop ongoing measurement
Change to main menu
"Select valve" is first menu point and already highlighted
Select "Select valve"
Highlight "Direct kv input"
Select "Direct kv input"
The BasicMes-2 automatically returns to main screen where
valve presetting can be changed. Default presetting is
lowest presetting stored in database
Change kv-value
A cursor appears at first position.
Move to digit which should be
changed
Increase or decrease value
Continue with next digit, etc. When finished volume unit can
also be changed:
Move cursor to right until unit is
highlighted
Change unit
Confirm kv-value and unit and
return to measuring mode
GB
Key
UP
DOWN
È
Key
UP
DOWN
È
Command Key
STOP
ON
MENU
ESC
OK
ON
UP/
È
DOWN
OK
ON
UP/
È
DOWN
ON
Æ
UP/
È
DOWN
ON
Æ
UP/
È
DOWN
OK
ON
5
Function Overview
The function overview is based on the main menu of the
BasicMes-2. Functions are explained in the same order as
they appear in the main menu.
5.1 How to access the Main Menu
When switched on the BasicMes-2 shows the main screen as
a default. How to access the main menu and a menu item:
Operation
Stop ongoing measurement
Change to main menu
Highlight menu item
Select menu item
The main menu has the following menu items:
Menu item
Select valve
Select project
Hydr. balancing
Temp. measurement
Leakage test
Data logging
DP measurement
USB data exchange
Print
Save measurements
Data management
Setup
Calibration
5.1.1 Valve Selection ("Select valve")
Used to select a valve from internal database.
Operation
Highlight manufacturer, e.g.
"Resideo"
Select manufacturer
Highlight and select valve and
valve size in same way
6
Command Key
STOP
ON
MENU
ESC
UP/
È
DOWN
OK
ON
Purpose
Select valve from database
Select project from database
Tag measuring result for
printing and/or saving
Save temperature
measurements and tag for
printing and/or saving
Set parameters and perform
leakage test
Set parameters and start
data log
Display of differential
pressure only (no flow)
Activate data exchange with
PC
Print results via pocket
printer
Print results via pocket
printer
Delete projects or risers
Change setup options
Access calibration menu
Command Key
UP/
È
DOWN
OK
ON
OK
UP/
È
DOWN /
ON
MU2H-2323GE25 R0620
Tabla de contenido
