Route Guidance; Retrieve Position Information; Trip Meter - Nokia N Serie Manual Del Usuario

The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
To use GPS data, the GPS receiver of your device must
receive position information from at least three satellites
to calculate the coordinates of your location.

Route guidance

To use route guidance, select Navigation. Start the route
guidance outdoors. If started indoors, the GPS receiver may
not receive the necessary information from the satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as buildings
and natural obstacles, are ignored. Differences in altitude
are not taken into account when calculating the distance.
Route guidance is active only when you move.
To set your trip destination, select Options
and a landmark as the destination, or enter the latitude
and longitude coordinates. Select Stop navigation
the destination set for your trip.
All manuals and user guides at all-guides.com

Retrieve position information

To view the position information of your current location,
select Position. An estimate of the accuracy of the location
is shown on the display.
To save your current location as a landmark, select
Options > Save
Landmarks are saved locations with more information, and
they can be used in other compatible applications and
transferred between compatible devices.

Trip meter

Select Trip distance
distance calculation, and
values remain on the display. Use this feature outdoors to
receive a better GPS signal.
Select Reset to set the trip distance and time and average
and maximum speeds to zero, and to start a new calculation.
Select Restart
to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
> Set destination
and quality of GPS signals.
to clear
position.
> Options > Start to activate trip
Stop to deactivate it. The calculated
to also set the odometer and total time
75