Nokia N Serie Manual Del Usuario página 118

Proxy server address—Define the address for the
proxy server.
Proxy port number—Enter the proxy port number.
Wireless LAN access points
Follow the instructions from the WLAN service provider.
WLAN network name—Select Enter manually
for networks. If you select an existing network,
network mode and WLAN security mode
by the settings of its access point device.
Network status—Defines whether the network name
is shown.
WLAN network mode—Select Ad-hoc
network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad-hoc network, all devices must use the same
network name.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the network
supports them.
WLAN security settings—Enter the settings for the
selected security mode:
Security settings for WEP:
All manuals and user guides at all-guides.com
• Wep key in
create up to four WEP keys. The same settings must be
entered on the WLAN access point device.
•
Authentication
the authentication type between your device and the
WLAN access point device.
or Search
•
WEP key
WLAN
the key),
are determined
WEP key
Security settings for
•
WPA/WPA2—Select the means of authentication:
to use an extensible authentication protocol (EAP)
to create an ad hoc
plug-in, or
Complete the appropriate settings:
•
EAP plug-in settings
WLAN
as your service provider instructs.
•
Pre-shared key
password. The same password must be entered on the
WLAN access point device.
•
TKIP encryption
Temporal Key Integrity Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options
the following:
use—Select the WEP key number. You can
type—Select Open or Shared
settings—Enter WEP encryption
WEP key format (ASCII or Hexadecimal), and
(the WEP key data in the selected format).
802.1x and WPA/WPA2:
Pre-shared key to use a password.
(only for EAP)—Enter the settings
(only for Pre-shared key)—Enter a
(only for WPA/WPA2)—Select whether
> Advanced settings and from
for
(length of
EAP
117