Accessories - Emerson AVENTICS PE5 Manual De Usuario

General data
Max. switching current per switch output
Switching delay
Switching time
Diagnostic output
Analog output signal
Ohmic load for current output
Ohmic load for voltage output
Non-linearity
Accuracy
Non-repeatability
Measuring temperature range
Permissible medium
Compressed air quality acc. to
ISO 8573-1:2010
Pneumatic ports
1)
For power supply, use a limited-energy circuit according to clause 9.4 of stan-
dard UL 61010, 3rd edition.
2)
Due to the capacitive input current, the sensors cannot be connected in series.

13 Accessories

See online catalog
AVENTICS™ PE5 | R412010843-BAL-001-AG | English
100 mA
0 ... 50 s (programmable)
≤ 5 ms
Switch output 2 configurable
Optional 4 to 20 mA, 0 to 10 V, automatic
switching depending on the connected load
or settable to a fixed value
Output signals invertible: 20 to 4 mA, 10 to
0 V
< 600 ohms
> 3 kiloohms
≤ ± 0.5% of the range
≤ ± 1.5% of the range
≤ ± 2.0% of the range including temperature
error
≤ ± 0.2% of the range
+10 ... +60°C
Compressed air
Max. particle size: ≤ 40 µm
3
Oil content: 0 ... 40 mg/m
The pressure dew point must be at least 15°C
below the ambient and medium tempera-
tures and must not exceed 3°C.
2x G1/4 acc. to ISO 16030
1x push-in fitting, 4 mm, and 1x G1/4 acc. to
ISO 16030
23