Pulmic INDUSTRIAL 35 Manual De Usuario página 13

Ocultar thumbs Ver también para INDUSTRIAL 35:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
PULMIC INDUSTRIAL 35
On the battery, the indicator light has the following meaning:
LEDs ON
CHARGE LEVEL
The approximate time for recharging is 4-5 hours (depending on the level of
discharge of the battery). After final charging, remove the connector from
battery housing and then remove the battery charger (Ref. 13980) of the
main electric web.
IT IS RECOMMENDED TO RECHARGE THE BATTERY AFTER EACH
WORKING DAY
Never recharge the battery with extreme temperatures, the charging
temperature range is 0° to 40C°. It is recommended before starting the
recharge wait a while until the battery gets cool. It is normal for the charger
to warm up slightly during charging.
For extended periods of inactivity, you should remove the battery from the
sprayer and store at half load in a dry and stable temperature (ideal range of
5° to 15°C), it is also advisable to monitor the state of charge at least once
every six months and whether to proceed with timely recharge depending
on future use.
When replacing the battery, have an original spare part and insert it into
accommodation as instructed. Use only the charger supplied with this
equipment, connected to a power socket AC standard (100/240 volts,
50-60 Hz).
EXPLOSION RISK
CONNECT THE CHARGER ONLY IN INDOORS. IN DRY PLACES &
AWAY FROM CHILDRENS. DO NOT USE THE CHARGER IN EXPLOSIVE
ENVIRONMENTS. DO NOT LEAVE THE SPRAYER IN OUT DOORS. &
WITH TEMPERATURES BELOW ZERO.
DO NOT OPEN THE BATTERY OR KEEP NEAR ANY HEAT SOURCES.
LEAVE WASTED BATTERIES IN AN AUTHORIZED PLACE.
1
Less than 20%
21% - 40%
— 13 —
2
3
41 - 60%
61% - 80%
www.gruposanz.es
4
5
81% - 100%
Tabla de contenido
loading

Tabla de contenido