Eshift With Shimano Di2 Derailleur Gears - Bosch eShift Shimano Nexus Di2 Manual Original

OBJ_BUCH-3117-001.book Page 4 Thursday, June 22, 2017 3:14 PM
English–4

eShift with Shimano Di2 derailleur gears

Always use the Shimano gearstick to shift gears for Shimano
Di2 derailleur gears.
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
– ...
– "Gear adjustment": This menu item can be used to per-
form precision adjustment on the Shimano Di2. The pre-
defined adjustment range can be found in the operating
instructions provided by the transmission manufacturer.
Perform precision adjustment as soon as you hear the
gearing make unusual noises. This menu item is displayed
only when the on-board computer is in the holder.
– "Gear recovery": You can use this menu item to shift
down a gear if the gearing has been moved out of position,
e.g. due to an impact on the gearing or a fall. The procedure
for shifting down a gear is described in the operating in-
structions from the gearing manufacturer. This menu item
is displayed only when the on-board computer is in the
holder.
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift field
is not visible (e.g. in settings).
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
You can precisely adjust the Shimano Di2 under "Gear ad-
justment". The pre-defined adjustment range can be found in
the operating instructions provided by the transmission
manufacturer. Perform precision adjustment as soon as you
hear the gearing make unusual noises.
0 275 007 XES | (22.6.17)
– ...
– "Gear vx.x.x.x": This is the software version of the
variable speed transmission. This menu item is displayed
only when the on-board computer is in the holder. This
menu item is only displayed in conjunction with an elec-
tronic variable speed transmission.
– ...
Intuvia eShift function displays
You can choose from the following additional functions in the
function display (combination of text display and value
display):
– ...
– "Gear": The currently engaged gear is shown on the
display. The newly engaged gear is briefly shown on the
display each time the gear is changed.
– ...
"Gear recovery": You can use this menu item to shift down a
gear if the gearing has been moved out of position, e.g. due to
an impact on the gearing or a fall. The procedure for shifting
down a gear is described in the operating instructions from
the gearing manufacturer. This menu item is displayed only
when the on-board computer is in the holder.
Bosch eBike Systems