Remote Control Buttons - Grundig GSB 810 Manual Del Usuario

AT A GLANCE
See the figure on page 3.
Controls are on the front page
LED,
A
– lights up red whenever the
device is in standby mode;
– lights up white if the source
device "TV" has been se-
lected.
– lights up orange if the source
device "Aux In" has been
selected.
– Flashes red when the sound is
muted.
8
Switches the device on from
standby mode and back off
again.
+ V
Increases the volume.
– V Decreases the volume.
SOURCE Press briefly to select the source
device
and "Bluetooth".
Press and hold to start Bluetooth
pairing; the display
rapidly.
LED flashes rapidly during the
B
Bluetooth pairing process.
Connection jacks and controls on
the back page
AUX IN
Audio signal input (ø 3.5 mm)
for connecting an external
device.
RCA INPUT
Audio signal input (Cinch) for
connecting the LCD TV.
SUB OUT
Audio signal output (Cinch) for
an external subwoofer.
POWER
Switches the device on and off.
ON/OFF
14 ENGLISH
All manuals and user guides at all-guides.com
------------------------------------------------------------------------------------------------------------------------
"TV", "external device"
flashes
B
230V
Mains cable.
50/60Hz 0.1A
Note:
The Soundbar is only com-
7
pletely separated from the
mains once the mains plug
has been pulled.

Remote control buttons

8
Switches the device on from
standby mode and back off
again.
Mutes the Soundbar speakers
S
and unmutes them again.
Press briefly to select the source
device "Bluetooth";
press and hold to start Bluetooth
pairing.
3D
Activates stereo spread.
AUX Selects the source device con-
nected to the
TV
Selects the source device "TV"
(in the jack
+ V –
Volume change.
Selects the previous track in
Bluetooth mode.
Starts playback in Bluetooth
mode and switches between
play/pause.
Selects the next track in Blue-
tooth mode.
»AUX IN« jack.
»RCA INPUT«).