When The Work Is Done - Siemens Z 6.0 Instrucciones De Uso

en
Vacuuming
8
Figure
a) The required suction level can be infinitely adjusted by
turning the control knob in the direction of the arrow.
Low
suction range:
For vacuuming delicate fabrics, e.g. curtains.
Moderate
suction range:
For daily cleaning on lightly soiled areas.
High
suction range:
For vacuuming durable floor coverings, hard floors
and heavily soiled surfaces.
b)Automatic mode:
In the automatic setting, the suction is
automatically adjusted to the type of floor covering.
!
Caution: delicate materials such as curtains must
not be vacuumed using the automatic setting.
9
Figure
Adjusting the floor tool:
a) For vacuuming rugs
and carpets
b)For vacuuming
hard floors
Turbo brush
If your appliance is equipped with a turbo brush,
please consult the accompanying instruction manual
for notes on its use and maintenance.
Other accessories that you do not need can be stored
easily in the accessories compartment of the appliance
lid.
10
Figure
When the opening button is pressed, the lid of the
accessories compartment opens automatically.
Take out the required accessories.
11
Figure
After removal, close the lid of the accessories
compartment and engage the catch.
12
Figure
Vacuuming with accessories
(attach to handle or suction pipe as required)
a) Crevice nozzle
For cleaning crevices and corners
b)Upholstery nozzle
For cleaning upholstered furniture, curtains, etc.
c) Hard furnishings brush
For vacuuming picture frames, books, furniture
requiring particular care, etc.
* Dependent on model
All manuals and user guides at all-guides.com
Hard-floor brush
Figure
Cleaning the hard-floor brush
Figure
a) Vacuum from below to clean the brush.
b)Cut through threads and hairs wound round the
c) The tool connector can be removed if the vacuum
d)When putting the connecting piece back in place,
Figure
=>
=>
Figure

When the work is done

Figure
Figure
13*
For vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
14*
rollers using scissors.
Vacuum threads and hairs with the crevice nozzle.
channel becomes blocked.
Place the brush down with the intake port facing
upwards, push the guide at the side of the wheel
slightly outwards and pull the tool connector
upwards and away from the brush.
make sure that it is correctly seated and that it
engages correctly in the guide.
15
Once you have switched off the vacuum cleaner, you
can use the parking aid on the back of the vacuum
cleaner if you wish to stop vacuuming for a short
time.
To do this, slide the catch on the floor tool into the
groove on the back of the vacuum cleaner.
16
The appliance can also be carried using the carrying
handle when vacuuming stairs, for example.
17
Unplug the vacuum cleaner.
Briefly pull the power cord and release.
The cord rewinds automatically.
18
To store or transport the vacuum cleaner, use the
storage aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the
catch on the floor tool into the groove on the
underside of the appliance.
11