EN
GENERAL INSTALLATION CONDITIONS
• Before handling or connecting the equipment, please read this manual.
• In order to reduce the risk of fi re or electric shock, do not expose the
equipment to rain or moisture.
• Do not obstruct the equipment's ventilation system.
• Please allow air circulation around the equipment
• The equipment must not come into contact with water or even be
splashed by liquids. Do not place containers with water on or near the
equipment if it is not adequately protected.
• Do not place the equipment near sources of heat or in excessively
moisture conditions.
• Do not place the equipment where it may be affected by strong vibra-
tions or knocks.
• The product should be fi xed to the wall before plugging it into the
network.
HOW TO USE THE EQUIPMENT SAFETY
• The powering supply of this product is: 196 - 264V~ 50/60 Hz.
• Do not manipulate the equipment while it is plugged into the network.
• If any liquid or object falls inside the equipment, please contact a spe-
cialized technician.
• To disconnect the equipment from the mains, pull from the plug, and
never pull from the cable.
• Do not connect the equipment to the mains until all the other connec-
tions have been made.
• The mains socket that is going to be used to connect the equipment
should be located nearby and should be easily accessible.
DESCRIPTION OF THE ELECTRICAL SAFETY SYMBOLS
• To avoid the risk of fi re or electric shock, do not open the
equipment.
• This symbol indicates that the equipment complies with
the safety requirements for class II equipment.
• This symbol indicates that the equipment complies with
the safety requirements for equipment of marked CE.
• This symbol indicates that only can be used indoors.
5
