Basic Operations; Taking A Photo; Recording A Video Clip - AIPTEK iS2 Manual De Instrucciones

Basic Operations

When recording or shooting in 2D mode, only the right lens is activated.
This product utilizes the "Parallax Barrier" 3D technology. The parallax barrier is a special layer
placed in front of the LCD screen. In 3D mode, it allows each of your eye to see a different set of
pixels on the screen (hence the 3D effect). The brightness of the screen seems to be halved in
3D mode.

Taking a photo

1. Move the Joystick up/down ( ) to zoom in/out the
image until a proper scene is set.
2. Press the Shutter button (
To avoid fuzzy photos, please hold the camera steady or
use a tripod.
In order to optimize the 3D effect, the ideal shooting range
is 1m~4m (3ft~13ft), and you are advised to take pictures
with sufficient light.

Recording a video clip

1. Press the Record button (
2. During recording, you can move the Joystick up/down
( ) to zoom in/out. You can also press OK to pause or
resume the recording.
3. Press the Record button (
recording.
When recording in a dark environment, please use extra
light source to illuminate the subject.
All manuals and user guides at all-guides.com
Press this button (
mode. Also, the image showing on the
LCD screen will become 2D/3D. Pressing
this button in playback can change the
2D or 3D files store in your camera or
memory card. Please note that 3D files
cannot be recorded/viewed/deleted in 2D
mode, and vice versa. The 2D/3D files are
stored separately.
) to take a photo.
) to start the recording.
) again to stop the
4
) to switch 2D/3D