Loading The Battery; Charging Battery; Inserting The Sd/Mmc Card (Optional) - AIPTEK PocketDV T290 Manual De Instrucciones

All manuals and user guides at all-guides.com

Loading the battery

Note: Upon using the battery for the first time, you are
recommended to fully discharge and then charge the battery
for 8 hours to ensure its lifecycle.
1. Slide open the battery compartment cover as indicated.
2. Place the accessory Li-Ion battery into the compartment.
Note that the metallic contacts must be aligned with the
contacts in the compartment.
3. Replace the cover.

Charging battery

1. Connect one end of the cable to the USB port of the
camcorder.
2. Plug the AC adapter to a wall outlet, or connect the other end
of the USB cable to the PC that has been powered on.
3. The charge starts. The LED indicates red light during
charging. When the battery is fully charged, the LED light will
go out.
Note: When using a PC to charge the battery, do not power on
the camcorder or the charge will stop.

Inserting the SD/MMC card (optional)

1. Insert the card in the direction of indication until it reaches the end of
the slot.
2. When using a SD card, the built-in memory will become inaccessible.
3. To remove the SD card, gently push the card until it pops up.

open
close