Replacing The Saw Chain; Replacing The Suction Head; Cleaning The Air Filter; Replacing The Spark Plug - stayer OLMO G1-250 Manual De Instrucciones

6.4 Replacing the saw chain (Fig. 55)
Only use saw chains and guide bars designed for this
chain saw!
Check the pinion before mounting a new chain.
Worn pinions may damage the new saw chain and must
thus be replaced.
6.5 Replacing the suction head (Fig. 56)
The felt filter (N) of the suction head may get obstructed. It is
recommended to replace the suction head once quarterly to
ensure trouble-free fuel circulation to the carburetor.
To remove and replace the suction head, extract it through
the tank inlet using a piece of wire having a hook-shaped
bent end.
6.6 Cleaning the air filter (Fig. 57)
(OLMO G1-250, OLMO G2-400, OLMO G3-450)
Unscrew the screw (23) and extract the cover of the filter
box (20).
IMPORTANT: Cover the admission port with a clean cloth
to avoid particles of debris falling into the carburetor. Extract
the air filter (24).
To avoid injuring your eyes, do NOT blow the particles
of debris! Do not use fuel to clean the air filter.
Clean the air filter with a soft brush.
If the filter is very dirty, clean it with lukewarm water with
dish detergent.
Let the air filter dry completely.
If the filter is very dirty, clean it frequently (several times a
day) because the whole of the engine power can be
extracted only with a clean air filter.
Replace damaged air filters immediately.
The cloth pieces or particles of debris may damage the
engine.
6.7 Replacing the spark plug (Figs. 58 and 59)
(OLMO G1-250, OLMO G2-400, OLMO G3-450)
Do not touch the spark plug or the spark plug cap when
the engine is running (high voltage).
Switch off the engine before beginning any
maintenance work. A hot engine may cause you burns.
Put on protective gloves!
The spark plug (12) must be replaced in case that that the
isolator us damaged, the electrode is eroded (is burned) o if
the electrodes are very dirty or oily.
Remove the cover of the filter box (20) (refer to "Cleaning
the air filter" (24)).
Separation of the electrode (Fig. 59)
The separation of the electrode must be 0.6-0.7 mm.

6.8 Instructions for periodic maintenance

To secure a long service life, avoid damages and secure
complete operation of the safety devices, the subsequent
maintenance must be carried out regularly. Guarantee
claims may only be recognized when this work has been
regularly and duly carried out. The lack of carrying out
maintenance work may entail accidents!
The user of the chain saw may not carry out maintenance
works which are not indicated in this instruction manual. All
works must be carried out by a STAYER Service Center.
ENGLISH
All manuals and user guides at all-guides.com
47

7. Service, spare parts

Maintenance and repairs
Maintenance and repair of modern engines as well as of the
safety devices require a qualified technical education and a
special workshop equipped with special tools and checking
devices.
We thus recommend you to refer to a STAYER Service
Center regarding any works which are not described in this
instruction manual.
The STAYER Service Centers have all necessary
equipment and qualified and expert staff that may find
economical solutions and to advise you in respect of any
inquiry.
We ask you to contact the nearest Service Center.
Spare parts
Reliable long-term operation as well as safety of your chain
saw depends, among other things, on the quality of the
spare parts used. Use original STAYER spare parts only.
Only original spare parts and accessories guarantee the
highest quality of materials, dimensions, operation and
safety.
You may obtain original spare parts and accessories at your
local dealer.
He has also a list of spare parts for determining the amount
of spare parts as required, and will be constantly informed
on the most recent improvements and innovations in spare
parts.
Please take into account that if you use parts other than
original STAYER spare parts, the STAYER product
guarantee will automatically become invalidated.
47