TECshow BLINDER LITE Manual De Usuario página 5

DMX5121 Control
Channel Channel
Address
CH 1 0-255
CH 2 1-255
CH 3 1-255
CH 4 0-255
CH 5 0-255
CH 6 0-255
CH 7 0-255
CH 8 0-255
Notice
Be sure to follow figures 2 & 3 when making your
own cables. Do not connect the cable's shields
conductor to the ground lug or allow the shield
conductor to come in contact with the XLR's outer
casing. Grounding the shield could cause a short
circuit and erratic behaviour.
DMX-512 Out
3-pin XLR
XLR PIN Configuration
PIN 1 = Ground
PIN 2 = Negative
PIN 3 = Positive
FIGURE 2
XLR MALE SOCKET
1 ground
2 cold
3 hot
FIGURE 3
Design and product specifications are subject to change without prior notice.
Function
Dimmer
Strobe
Macro Function
Macro Function
Speed Adjust
White Dimmer
White Dimmer
White Dimmer
White Dimmer
common
DMX-512 In
3-pin XLR
XLR FEMALE SOCKET
2 cold
1 ground
3 hot
Line terminarion
When longer runs of cable are used, you may need
to use a terminator on the last unit to avoid erratic
behaviour.
Terminator reduces signal transmission problems
and interferance. It is always advisable to connect a
DMX terminal, (resistance 120 Ohm 1/4W) between
pin 2 (DMX-) and pin 3 (DMX+) of the last fixture.
P. 5
| Tecshow Blinder Lite
English version