Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
5. Functions
• Easy to switch between up to 3 HDMI sources (e.g. Blu-ray/DVD
player, receiver, computer, games console)
• Quick and easy switching using a remote control
• Automatic selection of the input source when switching on
• No additional power supply required, the power is supplied via
the connected devices
• Supports 3D and full HD resolution
6. Getting started and operation
• Connect the source devices (e.g. Blu-ray/DVD player, receiver,
computer, games console) to the HDMI inputs (input 1-3) using
HDMI cables (not included in the delivery package). The LED that
corresponds to the active input (1) lights up.
• Now connect your output device (e.g. TV, projector, monitor)
to the HDMI outputs using HDMI cables (not included in the
delivery package).
• Turn on the connected devices. The power LED (2) lights up.
• You can now select all inputs via the remote control (6).
• It is also possible to select the source directly on the HDMI
switching desk using the Select button (4).
Information about the power supply
In some cases, it may be necessary to provide the HDMI
switching desk with additional power via the USB socket (5). To
do this, connect a micro USB / USB cable to the USB socket (5)
and a free USB port on your TV or a USB power adapter (5 V /
100 mA, not included in the delivery package).

7. Troubleshooting

Problem
Solution
No picture
• Ensure that all cables are correctly connected.
• Check to be sure that all devices are
switched on.
• Make sure that the TV is set to the correct
channel.
• Connect the HDMI switch to the USB power
supply.
• In some cases, it may be necessary to provide
the HDMI switching desk with additional
power via the USB socket (5).
Poor picture,
• Ensure that all cables are correctly connected.
audio inter-
• Try to connect the HDMI source directly to the
ruptions
output device. If nothing changes, you need to
replace the source device.
• Use a 1.4 HDMI cable
• Your HDMI cable should not exceed a total
length of 5 m.
• Switch all devices off and then on again.
8. Care and Maintenance
Note
Disconnect the device from the power supply before cleaning it
or if it is not going to be used for a long period of time.
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents.
9. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
10. Technical Data
3 HDMI inputs
Connections
1 HDMI output
480i/480p/576i/576p/720p/
Supported
resolutions
1080i/1080p
Compatible with HDCP 1.4
HDCP version
LPCM, Dolby-AC3, DTS7.1, Dolby
Supported audio
formats
True HD, DTS-HD master audio
Manually via the button on the
Source
device, automatically when swit-
selection
ching on or via remote control
From source device (HDMI input)
Power supply
via USB (5 V/100 mA)
11. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of
with household waste. Consumers are obliged by law
to return electrical and electronic devices as well as
batteries at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are
de ned by the national law of the respective country. This symbol
on the product, the instruction manual or the package indicates
that a product is subject to these regulations. By recycling, reusing
the materials or other forms of utilising old devices/Batteries, you
are making an important contribution to protecting our
environment.
3
Tabla de contenido
loading

Tabla de contenido