Remote Control; Before Using For The First Time - Panasonic SC-SB1 Manual De Instrucciones

Remote control

1
2
3
4
1 Turn this system on or off (
2 Select the input source (
"HDMI(BD)" --# "HDMI(TV)" --# "AUX"
^----------- " " (Bluetooth
3 Select the Bluetooth
®
( 9)
4 Select the sound mode (
5 Adjust the bass (adjustable in four steps)
Lowest
Highest
6 Switch the brightness of the LED indicators
7 Adjust the volume of this system (
8 Mute the sound ( 9)
9 Adjust the delay between video and audio
1 Press [AUDIO DELAY] on the remote control.
≥ The current mode will be indicated by the
corresponding LED indicator.
2 While the current mode is indicated (about
10 sec), press [i SUBWOOFER] or
[SUBWOOFER j].
≥ The setting changes in the following order each
time you press [i SUBWOOFER].
(It changes in the reverse order if you press
[SUBWOOFER j].)
"Auto" --# "Off" --# "Level 1" --# "Level 2"
6
(6) TQBS0132
All manuals and user guides at all-guides.com
5
6
7
8
9
9)
9)
) -----------}
®
device as the source
9)
9)
≥ If no operation is performed for about 10 sec or any
button other than [i SUBWOOFER],
[SUBWOOFER j] or [DIMMER] is pressed, the
indicators return to normal status.
(If the bass is accidentally adjusted when
[i SUBWOOFER] or [SUBWOOFER j] is
pressed, follow the steps again from step 1.)
"Auto"
"Off"
"Level 1"
"Level 2"

∫ Before using for the first time

Remove the insulation sheet A.
∫ To replace a button-type battery
Battery type: CR2025 (Lithium battery)


≥ Set the button-type battery with its (i) mark
facing upward.
≥ The symbols on the supplied remote control
represent the following:
Warning (refer to Operating Instructions for the button
cell battery)