Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Changing Brake Fluid
1.
Repeat the brake bleeding procedure as described above. As the fluid is being completely
changed regularly check the level in the replenishment bottle (7).
2.
When new fluid can be seen in the clear tube tighten the brake nipple.
3.
Repeat this procedure at every wheel. When brake bleeding and/or fluid changing is complete,
test the action of the brake pedal to ensure that the brakes are working correctly, before driving
the vehicle on the road.
4.
Apply copper grease to the brake bleeding nipples before and after the brake bleeding procedure
to eliminate the possibility of seized or broken nipples when the brakes are next bled (fig.4).
MAINTENANCE
We recommend a thorough cleaning after each use.
NOTE: All of our products are continuously improved and we reserve the right to change
specifications and components without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 24 months from purchase date.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
L
d . l h
a t s
w
s
@
o f n i
: l i
Tabla de contenido
