Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MOUNTING THE SUCTION ATTACHMENT
Attention: disconnect the pneumatic tool from the compressed air source only if you want to install /
disconnect accessories or fill with liquid.
The suction attachment converts the cleaning gun to a high-performance helper for cleaning car
carpets and seat covers. Proceed as follows for the conversion:
1. First remove loose dirt from the surface to be cleaned by brushing or vacuuming.
2. Remove the blue carpet brush (15).
3. Push the suction attachment (1) over the front tube of the cleaning gun.
4. Tighten fixing screw (3) to fix the suction attachment (1) to the cleaning gun.
5. Select one of the four possible suitable hose adapters (10-11-12-13). The hose adapter serves to
connect the suction hose to the cleaning gun.
6. Disassemble the cleaning agent container (9) from the cleaning gun.
7. Fill the container (9) with suitable cleaning agent for carpets and padding.
8. Fix the container (9) back onto the cleaning gun.
9. Connect the compressed air nipple (17) of the cleaning gun to the compressed air source.
10. Switch on the wet vacuum cleaner.
11. Press the trigger (5) and move the suction nozzle (2) of the suction attachment (1) with a distance
of max. 1 to 3 cm and an angle of approx. 45° over the surface to be cleaned. Turn the pressure
regulator (6) to set the best spray jet.
12. After finishing work, disassemble the cleaning agent container (9) from the cleaning gun and seal
the container (9) with the cover (16).
SHUT-OFF VALVE
The valve level is in the vertical position (valve open)
The cleaning agent is applied to the objectto be cleaned by the rotating
object, existing dirt particles are released and picked up directly by the
wet vacuum cleaner.
The valve level is in the horizontal position (valve closed)
The cleaning gun generates a strong air flow which ensures for a quick
drying of the surface cleaned.
MAINTENANCE
Attention: this pneumatic tool is not oiled via the compressed air connection like others, with this it is
completely sufficient to apply a drop of oil around the front nozzle after use. Then rotate the shaft a
few rotations by hand. Clean the gun thoroughly after each use and keep the compressed air cleaning
gun in a safe, dry place out of the reach of children.
ENVIRONMENTAL PROTECTION
At the end of its service life, dispose of the product in an environmentally friendly
manner. Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging must be sorted, sent to a recycling centre and
disposed of in an environmentally friendly manner.
Ask your local waste disposal authority about recycling measures.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
