Installation Instructions - LUND Rampage Products 86623 Instrucciones De Instalación

Installation Instructions

Install the roll bar mounts onto the left and
right side roll bar as shown to the right. Use
the included Allen wrench to tighten the bolts.
Leave the bolts loose enough to adjust the
height of the rack once installed.
Roll Bar Clamp
2
Locate and remove the nuts from the studs on the rear seat
mounts as shown to the right.
3
4
Rear seat
Rear seat mount bolts
Top view of vehicle
Open the rear door and fold down the rear seats.
With a helper, insert the assembled rack through
the tailgate door and onto the studs in the floor
as shown to the left. Re-install the factory nuts to
secure.
NOTE: It may be necessary to adjust the feet to get
a correct fit for the latches on the roll bar mounts in
the next steps.
3
Roll Bar