Installation Instructions; Parts List - LUND LND27021000 Instrucciones De Instalación

PARTS LIST:

1 License Plate Bracket
2 6mm x 20mm Screws
2 Adhesive Foam Strips
PROCEDURE:
1. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.
2. Attach two Adhesive Foam Strips on the Relocation Bracket as shown in Figure 1.
3. Remove center skid plate bolt from Bull Bar. Position Relocation Bracket against cross tube and on top of skid
plate. Attach Relocation Bracket to bull bar using the skid plate bolt removed in this step (Figure 2). Tighten at this
time.
4. Attach license plate to Relocation Bracket using the included (2) 6mm x 20mm Screws. Tighten at this time .

INSTALLATION INSTRUCTIONS

PART#: 27021000
LICENSE PLATE RELOCATION BRACKET
Adhesive
Foam Strips
6mm x 20mm
Screws
Figure 2
Page 2 of 5
I-Sheet Number 10785 Rev. A
Figure 1
Skid plate
center bolt