Roborock E5 Manual Del Usuario página 20

Installation
Mopping
5
Note:
• It is recommended that all floors are vacuumed at least three times before the first
mopping session to reduce excessive dirt buildup on the mop.
• Use barrier tape to prevent mopping carpeted areas, or remove carpets prior to
mopping.
• To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the water
tank.
• Cleaning the mop cloth every 60 minutes is recommended to ensure the water flow
rate and cleaning effect.
1. Adjust flow rate
Toggle the switch to adjust the flow rate according to your
needs.
2. Fill the water tank
Open the water tank, fill it with water, and close it tightly.
3. Install the mop cloth
Dampen the mop cloth and squeeze it until it stops dripping.
Insert it into the mounting slot in the water tank.
Low 4. Install the module
Slide the mop module in line with the alignment marks on the
High rear of the machine until you hear a "click".
20