Roborock E5 Manual Del Usuario página 19

Installation
Connect to the mobile app (recommended)
4
This robot uses the Xiaomi Home app.
1. Download app
Search for "Xiaomi Home" in the App Store or Google Play or
scan the QR code below, then download and install the app.
2. Reset WiFi
a. Open the top cover of the robot to reveal the WiFi
indicator light.
b. Press and hold the
"Resetting WiFi" voice alert. The reset is complete when
the WiFi indicator flashes slowly. The robot will then wait
for a connection.
and buttons until you hear the
Note: If you cannot connect your phone to the robot, reset the WiFi, and add your robot
as a new device.
3. Add device
Open the Xiaomi Home app and tap the "+" in the top right
corner. Add the robot by following the in-app prompts. After
adding, the robot can be found on the home page.
Note:
• Due to ongoing Xiaomi Home development, the actual process may differ slightly from
the above description. Always follow the instructions given in the app.
• Only 2.4GHz WiFi is supported.
19
WiFi indicator light
• Off: WiFi disabled
• Slow flashing: Waiting for
connection
• Fast flashing: Connecting
• Steady: WiFi connected