Roborock E5 Manual Del Usuario página 17

Installation
Using the robot
Position the charging dock
1
Place the Charging Dock against the wall on a flat surface and
plug it into mains power.
Dock Location Beacon
More than
0.5m (1.6ft)
More than
1.5m (4.9ft)
More than
0.5m (1.6ft)
17
Note:
• Ensure that a distance of at least 0.5m (1.6ft) on both sides and 1.5m (4.9ft) in front is
retained around the Charging Dock.
• The Power Cable, when vertical to the floor, may get caught by the robot, disconnecting the
Charging Dock.
• The Power Indicator is on when the Charging Dock is connected to mains power, and off
when the robot is charging.
• For a better app user experience, place the Charging Dock in an area with a strong WiFi signal.
• To avoid problems returning to the dock, do not place the Charging Dock in direct sunlight
or block the Dock Location Beacon.
• Do not place the Charging Dock in passageways or doorways. This may prevent access due
to the safe zone around the dock.