LF Harbor Breeze GAT24BNK6L Manual Del Usuario página 14

FINAL INSTALLATION
7. Connect male plug from motor housing (D) to female
plug from switch housing (H), matching up the colors
on the male plug with the colors on the female plug
for correct fit. Make sure plugs are connected
completely.
8.
Carefully arrange wires inside switch housing (H).
Align hole in edge of LED light kit (F) with loosened
switch housing screw (O) in switch housing (H).
Re-insert the other two switch housing screws (O)
previously removed. Tighten all three switch
housing screws (O) securely.
9. Align slots on shade (I) with protrusions on the
inside of the switch housing. Turn shade (I) to the
right (clockwise) until it no longer turns.
NOTE: Pull down gently on the shade (I) to make
sure that it is secured completely.
7
H
Female
Plug
3 8
H
3 9
14
D
O
F
O O
I
Male
Plug