Technical Specifications - ResMed Swift LT Manual De Instrucciones

Technical specifications

Note: The mask system does not contain latex, PVC or DEHP materials.
Pressure–Flow Note: The mask contains passive venting that meets the
requirements for protection against rebreathing as specified in
Curve
ISO 17510-2. As a result of manufacturing variations, the vent
flow rate may vary.
50
40
30
20
10
0
4 6 8
Mask Pressure (cm H
Dead Space Physical dead space is the empty volume of the mask to the
Information end of the swivel. Using the large cushions this is 94 mL.
CE designation in accordance with EC directive 93/42/EEC,
Standards
class IIa. ISO 14971, ISO 13485, ISO 10993-1 and ISO 17510-2.
Therapy 4 to 20 cm H
2
Pressure
Resistance Drop in pressure measured (nominal)
at 50 L/min: 0.54 cm H
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in
Sound
accordance with ISO 4871. The A-weighted sound power
level of the mask is 25 dBA, with uncertainty 3 dBA. The
A-weighted sound pressure level of the mask at a distance of
1 m is 17 dBA, with uncertainty 3 dBA.
Environmental Operating temperature: +41°F to 104°F (+5°C to +40°C)
Operating humidity: 15%–95% non-condensing
Conditions
Storage and transport temperature: -4°F to 140°F (-20°C to
+60°C)
Storage and transport humidity: 15%–95% non-condensing.
Gross 380 mm (H) x 57 mm (W) x 62 mm (D). Mask fully assembled
Dimensions with short tube assembly – no headgear.
Note: The manufacturer reserves the right to change these specifications
without notice.
Symbols
Caution, consult accompanying documents;
number; Temperature limitation;
contain latex; Indicates a Warning or Caution and alerts you to a possible
injury or explains special measures for the safe and effective use of the device.
All manuals and user guides at all-guides.com
Pressure
(cm H
4
8
12
16
10 12 14 16 18 20
20
O)
2
O.
O and at 100 L/min: 1.95 cm H
2
Lot number;
LOT
Humidity limitation; Does not
8
Flow
O) (L/min)
2
21
28
33
38
42
O.
2
Part
REF