Tabla de contenido
Idiomas disponibles
Idiomas disponibles
▶Premature sanding belt wear
▶Possible motor burnout
ES
▶Irregular sanding belt tracking
PROPER HAND PLACEMENT
PT
For ease of operation and maintaining proper control, the sander has a
front handle and a rear handle.
These handles allow two-handed operation, which aids in maintaining
control, keeping the sanding area level with the workpiece, and keeping
EN
hands clear of
the sanding belt. When operating the sander, always hold the front
handle with your left hand and the rear handle with your right hand.
FR
WARNING: Keep hands and fingers clear of moving sanding
belt, front idler roller, and drive roller assembly. Failure to
do so will result in serious personal injury.
WARNING: Do not let your fingers rest over the front or
right edge of the sander. If the sanding belt should run off,
or if it is not properly adjusted,your fingers could come in
contact with the moving sanding belt, resulting in possible
serious injury.
WARNING: The sander is designed to be operated as shown
with both hands on the tool at all times for maximum
control. Never operate the tool overhead or inverted from
the proper operating position; serious personal injury may
result.
CLEANING AND MAINTENANCE
DANGER! Always pull out the mains power plug before
startingany cleaning work.
CLEANING
Keep all safety devices, air vents and the motor housing free of dirt and
dust as far as possible. Wipe the equipment with a clean cloth or blow
it with compressed air at low pressure.
We recommend that you clean the device immediately each time you
have finished using it.
Clean the equipment regularly with a moist cloth and some soft soap.
Do not use cleaning agents or solvents; these could attack the plastic
parts of the equipment. Ensure that no water can seep into the device.
The ingress of water into an electric tool increases the risk of an
electric shock.
MAINTENANCE
There are no parts inside the equipment which require additional
maintenance.
STORING
Store the machine, operating instructions and where necessary the
Instruction manual
accessories in the original packaging in a dry place. In this way you will
always have all the information and parts ready to hand.
ref. 08778
Tabla de contenido
