Tabla de contenido
Idiomas disponibles
Idiomas disponibles
users.
▶Maintain power tools. Check for misalignment or jammed moving
parts, breakages and any other condition that might affect the power
tools operation. If it is damaged, the power tool must be repaired.
Many accidents are caused by poorly maintained power tools.
▶Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to jam and are easier
to control.
▶Use the power tool, accessories and cutting tools etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from intended could result in a hazardous situation.
5) SERVICE
Your power tool shoul be serviced by a qualiified specialist using only
standard spare parts. This will ensure that it meets the required safety
standards.
▶Use only the manufacturer's recommended replacement parts and
accessories.
▶Inspect and maintain the machine regularly. Have the machine
repaired only by an authorized repairer.
▶When not in use, store the machine out of the reach of children.
SPECIAL SAFETY WARNINGS FOR BELT
SANDER
▶Know your power tool. Read operator's manual carefully. Learn
its applications and limitations, as well as the specific potential
hazards related to this power tool. Following this rule will reduce the
risk of electric shock, fire, or serious injury.
▶Always wear eye protection with side shields marked to comply with
ANSI Z87.1 when assembling parts, operating the tool, or performing
maintenance. Following this rule will reduce the risk of serious
personal injury.
▶Protect your lungs. Wear a face or dust mask if the operation is
dusty. Following this rule will reduce the risk of serious personal
injury.
▶Protect your hearing. Wear hearing protection during extended
periods of operation. Following this rule will reduce the risk of
serious personal injury.
▶Inspect for and remove all nails from lumber before using this tool.
Following this rule will reduce the risk of serious personal injury.
▶Save these instructions. Refer to them frequently and use them to
instruct others who may use this tool. If you loan someone this tool,
loan them these instructions also.
ADDITIONAL SAFETY WARNINGS
▶Do not allow foreign matter to enter the hole for connecting the
rechargeable battery.
▶Never disassemble the rechargeable battery and charger.
Instruction manual
▶Never short-circuit the rechargeable battery. Short circuiting the
battery will cause a great electric current and overheat. It results in
burn or damage to the battery.
▶Do not dispose of the battery in fire. If the battery is burnt, it may
explode.
▶When using this unit continuously, the unit may overheat, leading to
damage in the motor and switch. Therefore, whenever the housing
becomes hot, give the saw a break for a while.
▶Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or inflammables into the charger air
ventilation slots will result in electrical shock hazard or damaged
charger.
▶Bring the battery to the shop from which it was purchased as soon
as the post-charging battery life becomes too short for practical
use. Do not dispose of the exhausted battery.
▶Preparing and checking the work environment. Make sure that the
work site meets all the conditions laid forth in the precautions.
▶Make sure that the battery is installed firmly. If it is as all loose it
could come off and cause an accident.
▶When finished with a job, pull out the battery from the main body.
▶Pull out battery before carrying out any adjustment, servicing or
maintenance.
▶Ensure that the switch is in the OFF position. If the battery installed
to power tool while the switch is in the ON position, the power
tool will start operating immediately, which could cause a serious
accident.
▶NEVER leave tool running unattended. Turn power off . Don't leave
tool until it comes to a complete stop.
ADDITIONAL SAFETY INSTRUCTIONS FOR
BATTERIES AND CHARGES
1) BATTERIES
▶Never attempt to open for any reason.
▶Do not store in locations where the temperature may exceed 40 ºC.
▶Charge only at ambient temperatures between 4 ºC and 40 ºC.
▶When disposing of batteries, follow the instructions given in the
section "Protecting the environment".
▶Do not cause short circuits. If connection is made between the
positive (+) and negative (-) terminal directly or via accidental
contact with metallic objects, the battery is short circuited and an
intense current will flow causing heat generation which may lead to
casing rupture or fire.
▶Do not heat. If batteries are heated to above 100 ºC, sealing and
insulating separators and other polymer components may be
damaged resulting in electrolyte leakage and/or internal short
Use only batteries and charges applicable for this
machine.
ref. 08778
ES
PT
EN
FR
Tabla de contenido
