Error Indicators - Sagem PHOTO EASY 110 Manual Del Usuario

Liasse azur PE110_En.fm Page 6 Vendredi, 17. mars 2006 11:24 11
I
NCIDENTS
Remark : The printer is fitted with an automatic time-out to prevent overheating, this can be tripped
when performing large print jobs. The printer automatically restarts the current print job as
soon as the temperature drops back to normal.
E
RROR INDICATORS
Indicator
Flashing red
Permanently red
P
ROBLEMS
No mains supply
The printer was unplugged
during a print job
No photograph is printed on
a sheet
The photograph is marked
with a continuous line or a lot
of spots
No printout from your
personal computer or
camera
End of ribbon
No more paper
Paper jam
Data reception error
Consumable not compatible
File format not supported
• Check that the power supply is correctly plugged into the mains.
• Check that the power supply connector is correctly plugged into the printer.
• Check that the mains socket is working (check fuses and/or circuit breakers of
your installation as necessary).
• Check that the printer is off and then reconnect the mains lead.
• Switch on the printer and wait for the initialisation phase to be completed, until
the indicator associated to this function lights up green.
• If a sheet of paper is jammed, carry out the procedure (Refer to paragraph
Paper jam, page -5).
• Printing will resume automatically.
• Are you using sheets that meet the technical specifications (Refer to
paragraph Consumables, page -5). Have the sheets been inserted glossy
face up?
• Clean the printhead (Refer to paragraph Cleaning the print head, page -5).
• Check that the cable is correctly connected (PC, camera...).
• Is the printer driver installed?
• Have you validated your consumable with the smartcard supplied?
- 6 -
Cause
S
OLUTIONS