Measurement Sensors; Entering Numbers And Text - HVS Cognex SensorView Guia Del Usuario

Measurement Sensors

COGNEX
You select Measurement sensors in the same way that you select a presence sensor:
after clicking Select Sensor, use the arrow keys to select the sensor, then click Select.
Moving or resizing a Sensor
Use the left and right arrows
to select the move or resize
handles. Press Select, then
use the arrows to move
or resze the sensor. Click
Apply to make the change
permanent.
COGNEX
Rotating a Sensor
(Width and Height sensors
only.) Use the left and right
arrows to select the rotate
handle. Press Select, then
use the arrows to rotate the
sensor. Click Apply to make
COGNEX
the change permanent.
Adjusting the caliper jaws
Use the left and right
arrows to select the jaw to
adjust. Press Select, then
use the arrows to move the
jaw. Click Apply to make
the change permanent.
14

Entering Numbers and Text

SensorView Teach Pendant uses simple spinner controls to let you enter numerical
values, such as line speed.
Selecting the value to change
Use the arrow keys to select
the value to change, then press
Select to activate the item.
COGNEX
Choosing from a list of values
Use the up and down arrows
to cycle through values. Press
Apply to use the new value.
COGNEX
Entering numerical values
For numerical values, use the
left and right buttons to select
the digit to change, then use the
up and down buttons to set the
digit's value. Press Apply to use
the new value.
15