Run Mode Screens - HVS Cognex SensorView Guia Del Usuario

Run Mode Screens

When you connect SensorView Teach Pendant to a running Checker or DataMan 100
sensor, you can display several different screens.
Checker Image Display
You specify the image that Checker displays
while running (the last detected part, last
failed part etc.)
You can also specify that Checker stop
updating (freeze) the display under specific
conditions
Checker Frozen Image
When the image displays Frozen you can
resume live display by clicking Resume.
Statistics
Checker lets switch between image display
and statistics display by clicking Statistics
and Image.
20
DataMan Image Display
If you are connected to a DataMan 100 sensor,
you can display the most recently decoded
image, or the most recent failed decode.
DataMan Data Display
Checker lets switch between image display
and data display by clicking Data and Image.
The data display lets you view the decoded
data from DataMan.
Run Mode Tips:
►To quickly change what images SensorView is displaying, click Main Menu, then click
Display & Record and select the desired options. Your settings will temporarily override
the job settings.
►To reset statistics, click Main Menu, then click Reset Statistics.
21