Tabla de contenido
Idiomas disponibles
Idiomas disponibles
C
21 Oil level indicator
22 Minimum mark "MIN"
on the oil level indicator
F
23 Bar bolt
24 Sprocket
25 Tab
26 Oil passages
Function description
The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail).
The tool is fitted with a rapid-action chain-
tensioning system and a fast-acting chain
brake. An automatic oil dosing regulator
ensures continuous chain lubrication.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.
Technical Data
Electric chain saw ............DG-ECS 2240
Rated input
voltage U .....................230-240 V~, 50 Hz
Input power P ............................... 2200 W
Safety class .........................................
Protection category............................ IPX0
Chain speed v
............................ 15.3 m/s
0
Weight
(without guide rail and chain)........... 4.3 kg
Weight (with guide rail and chain) ... 5.0 kg
Oiltank ...............................approx. 270 ml
Chain .......................TRILINK CL15056PB
Chain bar .....TRILINK 16"M1501656-1041
Chain link separation ......... 3/8" (9.53 mm)
Chain width ..................................1.27 mm
Teeth of the sprocket chain wheel ...........6
Length of the chain bar .................454 mm
Sawing length ...............................395 mm
Acoustic pressure level
(L
) .................... 94.1 dB (A); K
pA
Sound power level (L
measured ... 104.8 dB (A); K
guaranteed .............................107 dB(A)
Vibration (a
) .......... 3.22 m/s
h
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
II
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
Notes on safety
This section deals with the basic safety
regulations while working with the electric
chainsaw.
GB
= 3 dB
pA
)
WA
= 2.49 dB
WA
; K= 1.5 m/s
2
2
33
Capítulos
Tabla de contenido
