Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7 On/off switch
8 Rear handle
9 Allen key
16 Saw blade retainer
Function Description
The electric reciprocating saw is a hand-
held pendulum jigsaw with a saw blade
that moves back and forth. Please refer to
the descriptions below for information on
how the operating elements work.
Technical Data
Appliance .......................... DP-ERS 8010
Rated input
voltage U .....................230 - 240 V~, 50 Hz
Power input
(power consumption) P ................... 800 W
Idling speed n
............. 0-2800 min
0
Protection class ...................................
Protection category............................ IPX0
Stroke ................................approx. 20 mm
Max. cutting depth ............. in metal: 5 mm
....................................... in wood: 105 mm
Weight (incl. accessories) ...approx. 2.4 kg
Sound pressure level
(L
) ....................... 88 dB (A), K
pA
Sound power level (L
guaranteed ............................ 104 dB(A)
measured .............. 99 dB(A); K
Vibration (a
) when sawing
h
Chipboard a
.. 10.44 m/s
h,B
Wood beams a
h,WB
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
(rpm)
-1
= 5 dB
pA
)
WA
= 5 dB
WA
; K= 1.5 m/s
2
................14.12 m/s
K= 1.5 m/s
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
II
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
Notes on Safety
This section details the basic safety in-
structions for working with the appliance.
2
;
2
Symbols
2
Symbols in the manual
Warning symbols with informa-
tion on damage and injury pre-
vention.
GB
53
Capítulos
Tabla de contenido
