Maintenance Intervals; Maintenance Interval Table; Oiling The Saw Chain - Deltafox DG-ECS 2240 Traducción Del Manual De Instrucciones Origina

GB

Maintenance intervals

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.

Maintenance Interval Table

Machine part
Components of the chain
brake
Sprocket chain wheel
( 24)
Saw chain ( 5)
A
Saw chain ( 5)
A
Guide bar ( 4)
A
Guide bar ( 4)
A
Oil automatic system

Oiling the saw chain

Clean and oil the chain regularly.
In this way, you keep the chain
sharp and get optimum machine
performance. In case of damage
due to inadequate maintenance of
the saw chain, the guarantee claim
is invalid.
Remove the power plug and use
cut-protection gloves when you are
handling the chain or the chain bar.
• Oil the chain after cleaning, after 10
hours of use or at least once weekly,
depending on which comes first.
48
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
clean oil outflow duct
• Before oiling, the chain bar must be
cleaned thoroughly, in particular the
teeth of the rail. Use a whisk and a dry
cloth for that.
• Oil the individual chain links with the
aid of an oil suction gun with pinpoint
tip (available in the specialist trade).
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips
of the individual chain links.
Be- After 10
fore hours of
every opera-
use tion






After
every
use

