GB
Repair Service
For a charge, repairs not covered by the
guarantee can be carried out by our ser-
vice branch, which will be happy to issue
a cost estimate for you.
We can handle only equipment that has
been sent with adequate packaging and
postage.
Trouble shooting
Problem
Device does not
start
Chain does not
rotate
Inferior cutting per-
formance
Saw runs with diffi-
culty, chain comes off
Chain becomes hot,
smoke development
during sawing, dis-
coloration of the rail
52
Possible cause
Chain brake locked into
place.
Mains voltage defective
House protection fuse acti-
vated
Defective On/Off
switch (
13)
A
Worn carbon brushes
Defective motor
Chain brake blocks saw
chain (
5)
A
Incorrectly mounted saw
chain (
5)
A
Saw chain (
5) blunt
A
Chain tension insufficient
Chain tension insufficient
Too little chain oil
Attention: Please send your equipment
to our service branch in clean condition
and with an indication of the defect.
Equipment sent carriage forward or by
bulky goods, express or other special
freight will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.
Fault correction
Check chain brake.
Possibly release chain brake
Check plug socket, cable, line
and plug, where appropriate,
repair by electrical specialist.
Check house protection fuse,
see note
Repair by customer service
Repair by customer service
Repair by customer service
Check chain brake.
Possibly release chain brake
Mount saw chain correctly
Sharpen cutting teeth or place
on new chain
Check chain tension
Check chain tension
Check oil level and, where ap-
propriate, refill with chain oil,
check oil automatic system and,
where appropriate, clean oil
outflow duct or have repaired
by customer service