BGS technic 8496 Instruction Manual página 12

Idiomas disponibles

Idiomas disponibles

13. Do not leave batteries unused for extended period of time. Recharge the battery every 3~6
months and bring Li-Ion battery to 40~80% charge level before storage.
14. Li-Ion batteries are sensitive to high temperature and should be kept in a cool, dry and out of
direct light exposure. Ideal temperature for operation and storage is below 77°F.
15. For extension of the battery lifetime, the lithium-ion battery is designed with the protection function
to stop the output. In the case of described below, when using this product, even if you are pulling
the switch, the motor may stop. This is not malfunction but the result of protection function.
x When the battery power remaining runs out, the motor stops.
x If the tool is overloaded, the motor may stop. In this case, release the switch of tool and
eliminate causes of overloading. After that you can use it again.
x If the battery is overheated under overload work, the battery power may stop. In this case stop
using the battery and let the battery cool. After that you can use it again.
16. This product is designed with low voltage protection, which prevents the tool from over
discharging and prolong battery's lifespan.
Specifications
Model: BGS 8496
Voltage: 10.8V DC
Capacity: 400ml
Expel Force: 450 Kgf
No-Load Speed: 10 mm/sec
Tool Weight: 2195 g (with battery)
Battery Weight: 185 g
Changing Time: 1 Hour Auto Cut-off
View the Major Components
Front Cap
Compound Holder
Plastic Plunger Disk
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Connecting Cap
Rack
Main Switch
Speed Control Dial
Battery Pack
Battery Knob
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Rack Rear Knob
loading