Maintenance - Husqvarna TS 142K Manual De Usuario

1. Put the cutting deck in the transport position. Refer
To set the cutting deck in transport position or
to
mow position on page 14 .
2. Remove the rear discharge deflector (accessory) or
the mulch plug (accessory) if it is installed.
3. Put the discharge chute through the back plate and
into the chute adaptor for the cutting deck.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
18

Maintenance

Read and understand the
4. Install the 2 wing nuts.
5. Install the grass catcher.
6. Remove the grass catcher in the opposite sequence.
1720 - 002 - 21.10.2021