Beko CEG5331X Manual Del Usuario página 20

4
Operation
When is flashing, the appliance needs to be filled with coffee bean.
WARNING: Fill the coffee bean container only with coffee beans. Grounded coffee,
instant coffee, caramelized coffee and any other objects may damage the machine.
Press the hot water button to clean inside of the coffee maker before first use.
The Appliance is equipped with auto-shut off. Depending on the mode you have selected the
appliance will have different auto-shut off timing.
4.1 Adjusting The Volume Of Your Coffee/Hot Water
You can memorize your desired volume of coffee for espresso and also the hot water from 25ml to
250ml.
You can reset the volume of coffee back to the factory setting by selecting the default setting.
You can pull the coffee dispensing spout cover out, then take down the milk frother and switch
the milk frother to your desired direction for connecting the milk container (See chapter "Daily
Cleaning of the appliance", section cleaning the automatic milk froth system for how to take
down the milk frother), there is a protective cover for the milk tube connector inlet, just take it
off when you need to insert the milk tube connector.
Cleaning the automatic milk froth system before first use.
Use cold milk (at a temperature of approximately 5°C/41°F) with a protein content of at least
3% to ensure an optimal frothing result
After use, press button once to perform quick cleaning the system. See chapter "Daily Cleaning
of the appliance", section cleaning the automatic milk froth system).
20 / EN
Fully Automatic Coffee Machine / User Manual