Technical Data; Eu Declaration Of Conformity - Desoutter BLRTA045-3990-10S Instrucciones De Seguridad

Technical Data

Technical data
Voltage (V)
18 V or 36 V
Power consumption
500 W
Output drive
Model
BLRTA045-3990-10S
Output retaining type
Model
BLRTA045-3990-10S
Torque range (Nm)
Model
BLRTA045-3990-10S
Torque range (ft.lb)
Model
BLRTA045-3990-10S
Rated speed (rpm)
18 V or 36 V battery pack
Model
BLRTA045-3990-10S
Weight
Model (kg)
BLRTA045-3990- 1.92
10S With18V bat-
tery pack
BLRTA045-3990- 2.23
10S With 36V bat-
tery pack
The weight is given without the protective cover.
Wireless Communication
RFID 13.56 MHz
Frequency: 13.553 MHz - 13.567 MHz
H-Field: < 42 dBμA/m at 10 m
12/2021
Type
Sq. 3/8"
Type
through hole
Min. / Max.
20 / 45
Min. / Max.
14.75 / 33.19
3,990
(lb)
4.23
4.91
Storage and use conditions
Storage temperature
Operating temperature
Storage humidity
Operating humidity
Altitude up to
Usable in Pollution degree 2
environment
Indoor use only
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.

EU DECLARATION OF CONFORMITY

We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint
Herblain, France, declare under our sole responsibility that
the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s):
2006/42/EC, 2014/30/EU, 2011/65/EU, 2014/53/EU
Harmonized standards applied:
EN 62841-2-2:2015 + AC1:2015 EN 61000-6-2:2005 EN
61000-6-3:2007 + A1:2011 EN 61326-2-3:2013 EN 301
489-1 V2.2.0 EN 301 489-3 V2.1.1 EN62311 :2008
Authorities can request relevant technical information from:
Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands,
44818 Saint Herblain, France
Saint-Herblain, 2021/09/06
Pascal ROUSSY, R&D Manager
3 / 184
Safety Information
-20 to +70 °C (-4 to +158 F)
0 to 45 °C (32 to 113 F)
0-95 % RH (non-condensing)
0-90 % RH (non-condensing)
2000 m (6562 feet)