Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 1:
Position and Level
the Dryer
For further assistance refer to Section on Location
Requirements.
Install dryer before washer. This allows room for
attaching exhaust duct.
Install the four rubber cups found in the accessory bag.
Place the dryer in position, and adjust the legs until the
dryer is level.
LEVELING
DRYER
LEG
BASE
RUBBER
CUP
505048
Installing the Dryer . . .
LEVEL
D384IE1A
Step 2:
Connect Dryer Exhaust System
For further assistance refer to Sections on Location
Requirements and Dryer Exhaust Requirements.
WARNING
A clothes dryer produces combustible lint. To
reduce the risk of fire and combustion gas
accumulation the dryer MUST be exhausted
to the outdoors.
• DO NOT use plastic or thin foil flexible ducting.
• Locate dryer so exhaust duct is as short as possible.
• Be certain old ducts are cleaned before installing your
new dryer
• Use 4" (10.2 cm) diameter rigid or flexible metal duct.
• Use as few elbows as possible.
• Use duct tape on all joints.
• Failure to exhaust dryer properly will void
warranty.
D367IE1B
DO
NOTE: Venting materials are not supplied with the
dryer (obtain locally).
W116
D370IE1A
DON'T
(continued))
9
Capítulos
Tabla de contenido
