IVIEW K Serie Manual Del Usuario página 54

All manuals and user guides at all-guides.com
Function Description
Image Size / Quality Choose the image size (FRAME / FIELD / CIF) and quality (BEST / HIGH / NORMAL / BASIC).
Manual Record / Event Select the record type that the DVR will take recording (Yes / No), and select the IPS setting for the
Record / Timer Record selected record type.
Pre-Alarm Record Check this option if you want to enable the pre-alarm recording function.
When any alarm is triggered, the DVR will record 8MB video data before the alarm event is actually
happened.
Overwrite Select "Yes" to enable the HDD overwrite function when the HDD is full, or "No" to disable this
function.
When this function is on, and the recording and the pre-alarm function are activated, the DVR will
overwrite 8GB data from the oldest for continuous recording without notice.
Record Timer
In this menu list, you can set the record schedule for normal recording or motion recording.
‧ Permit
Select this checkbox to allow the record timer setting to be applied to the connected DVR. If this
checkbox is deselected, the setting will not be applied to the connected DVR even when you click
"Apply" and "OK".
‧ Routine / Motion
Click "Routine" tab to select the time range for continuous recording, or "Motion" tab to select the time
range within which the recording will be on when any movement is detected.
‧ Time Table
Find the day and time you want to enable the recording. Then, click to select the time interval(s). Each
interval represents 30 minutes.
To enable the recording all the time, click "＋"; to clear the record timer setting, click "－".
Alert
In "Alert", you can set the DVR to beep for notification when there's any alert happened. Check the
buzzer option you want, and set how long the beep sound will be lasted.
~50~
REMOTE OPERATION