Detection - IVIEW K Serie Manual Del Usuario

1) TITLE
You can change the default camera naming here. The default title is the channel number.
Move to the camera title you want to change, and press
character selection screen. Assign a new name to the camera up to six characters (letters or symbols or
numbers).
2) BRIG / CONT / SATU / HUE
You can adjust the brightness/contrast/saturation/hue of each channel here. The value is adjustable from 0 to
255.
3) COV
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated, the
wording "COV." Will be shown on the channel screen.
4) REC
Select if you want to enable recording for the selected channel (ON / OFF). When this function is activated, the
symbol " " will be shown on the channel screen.

7.1.2 Detection

In this submenu, you can set up detection-related functions.
Move to "DETECTION", and press
TITLE DET
CH1 OFF
CH2 OFF
CH3 OFF
CH4 OFF
CH5 OFF
CH6 OFF
CH7 OFF
CH8 OFF
CH9 OFF
CH10 OFF
NEXT
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT BACK
The submenu items are described below:
1) TITLE
Show the camera title of each channel set in "CAMERA".
2) DET
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
3) AREA
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Press on the control panel of the DVR to set the detection area. You will see similar screens as the following:
All manuals and user guides at all-guides.com
. You will see the following screen:
DETECTION
AREA LS SS
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
SETUP 07 03
NEXT ENTER
on the control panel of the DVR to access the
TS RE
02 10
02 10
02 10
02 10
02 10
02 10
02 10
02 10
02 10
02 10
~21~
ADVANCED MENU
ALARM
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF