Display - IVIEW K Serie Manual Del Usuario

Note: This DHCP function needs to be supported by a router or a cable modem network with DHCP
services, and a "DDNS account" to correspond the dynamic IP address to a specific "Hostname",
for this function to work properly.
For detailed DHCP settings, please refer to "Network" at page 45. For detailed DDNS settings,
please refer to "DDNS" at page 45.

7.1.5 Display

In this menu list, you can set up the settings of display.
Move to "DISPLAY", and press
DE-INTERLACE
QUAD DWELL DURATION (SEC)
FULL SCREEN DWELL DURATION (SEC)
VGA OUTPUT
(Selected Models Only)
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT BACK
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable the de-interlace function (ON / OFF).
Note: If you set the recording image size as "FRAME", please TURN ON de-interlace function.
If you set the recording image size as "CIF", please TURN OFF the de-interlace function.
2) QUAD DWELL DURATION (SEC)
Set the quad dwell duration time (3 / 5 / 10 / 15 seconds).
3) FULL SCREEN DWELL DURATION (SEC)
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).
4) VGA OUTPUT
(Selected Models Only)
Select the VGA output resolution. There are seven options for your choice:
800 x 600 / 1024 x 768 (default) / 1280 x 1024 / 1440 x 900 / 1400 x 1050 / 1680 x 1050 / 1600 x 1200
Note: To have the best image quality on your LCD monitor, make sure (1) the selected DVR VGA output
resolution is supported by your monitor, and (2) the VGA output settings on both the LCD monitor
and DVR are consistent.
If the image is not positioned or scaled properly, please go to your monitor's menu for adjustment.
For details, please refer to the user manual of your LCD monitor.
All manuals and user guides at all-guides.com
to enter the submenu. You will see the following screen:
DISPLAY
(Selected Models Only)
NEXT ENTER
(Selected Models Only)
~26~
ON
03
03
1024 X 678
ADVANCED MENU