Remote (Selected Models Only) - IVIEW K Serie Manual Del Usuario

7.1.7 Remote
(Selected Models Only)
In this menu list, you can set up remote devices to work properly.
Move to "REMOTE", and press
TITLE DEVICE
01 CAMERA
02 PTZ
03 CAMERA
04 CAMERA
05 CAMERA
06 CAMERA
07 CAMERA
08 CAMERA
09 CAMERA
10 CAMERA
NEXT
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT BACK
The submenu items are described below:
7) TITLE
Show the camera title of each channel set in "CAMERA".
8) DEVICE
Select the device type (CAMERA / PTZ) according to the connected camera for each channel.
9) ID
Set the ID number (0 ~ 255) for a PTZ camera.
After connecting to a PTZ camera correctly, the default ID of the PTZ camera will be shown on the screen.
10) PROTOCOL
Select NORMAL (our protocol) or P-D (PELCO-D) protocol.
11) RATE
Set the baud rate of connected PTZ camera (2400 / 4800 / 9600 / 19200 / 57600 / 115200).
Note: Please make sure the baud rate setting in the PTZ camera is the same as the setting here.
All manuals and user guides at all-guides.com
. You will see a similar screen as the following:
REMOTE
ID PROTOCOL
000 NORMAL
255 P-D
000 NORMAL
000 NORMAL
000 NORMAL
000 NORMAL
000 NORMAL
000 NORMAL
000 NORMAL
000 NORMAL
NEXT ENTER
~28~
ADVANCED MENU
RATE
02400
02400
02400
02400
02400
02400
02400
02400
02400
02400