Use And Operation - Asist AEIW160-MIGMA Instrucciones De Uso

dust and vibrations !!!
KEEP THESE SAFETY INSTRUCTIONS FOR
FUTURE REFERENCE !!!
DESCRIPTION (A)
The inverter is a rectifier provided with the most advan-
ced technology of inversion.
The development of a welding converter is considered
a revolution in welding industry.
The welding energy source may penetrate a thicker,
more concentrated and more stable arc. When the ad-
hesiveness and the workspace decrease, its reaction
is much faster. It means that this is a welding equip-
ment with various dynamic features, which may be set
to a larger or a smaller arc.
The welding equipment is characterized as follows:
It is efficient, energy-saving and compact. It provides
a stable arc, well-welded joints, high no-load voltage,
good compensation force capacity and is multipurpo-
se. It may weld stainless steel, alloy steel, carbon ste-
el, coper, aluminium and other non-ferrous metals. It
may work with electrodes having different properties
and materials, including acidic, alkaline and granular.
It may be used in high altitudes, different atmospheric
pressures, indoors or outdoors. When compared with
classic welding equipment, it is compact, with small
volume and weight, and its installation and operation
are easy.
Manual metal arc (MMA) means manual welding with
a coated electrode. This method is especially used du-
ring assembly welding due to the equipment mobility.
Inverter - a DC welding source determined for manu-
al welding by a coated electrode. The source utilizes
modern knowledge from power and control electronic
fields. This results in high performance with low wei-
ght and good welding properties. It is suitable for use
during assembly and craft work. The current range
enables use of electrodes starting from diameter of 1.6
mm to 4,0 mm.
1. Power switch
2. Protective cover
3. MMA controller
4. Quick coupling with polarity "+"
5. Quick coupling with polarity "-"
6. Voltmeter regulator
7. Voltmeter display
8. Network cable
9. Ampermeter display
50. Switch for selecting the welding method
51. MIG / MAG welding torch socket
52. Signaling
53. CO2 Polarizing cable connector
54. Accessories
Description on the nameplate
11. Transfer method
(converter - transformer - rectifier)
12. Model
13. Symbol for manual arc welding with coated bar
electrodes
14. Powering symbol
15. Protection type
16. No-load voltage
17. Input voltage
18. Working voltage
19. Max. input current
20. Effective working current
21. Adjustable output current
22. European standard for welding equipment for
manual arc welding with limited welding time.
23. Working current
24. Working cycle
(in 10 min time period - 35% means 3.5 min of welding
and 6.5 min of a standstill,
100% means continuous welding)
25. Input frequency
26. Serial number
27. Insulation class
28. High risk of electric shock
Accessories
1x ground terminal 200A / 16mm2
1x electrode holder 200A / 16mm2
1x MAG burner 3m
1x hammer
1x protective shield
PICTOGRAMS
Pictograms and values stated on the product
packaging:
a) Power supply values
b) Rated power
c) Electrode diameter
d) Welding current range

USE AND OPERATION

The ASIST equipment and machines are designed for
domestic
or hobby use only.
The manufacturer and the importer do not recommend
to use this equipment under extreme conditions and at
high loads. Any other additional requirements must be
agreed upon by the manufacturer and the buyer.
Please remember that our equipment has not been
designed for commercial, trade or industrial use ac-
cording to its purpose. We accept no liability if the
equipment is used in commercial, trade or industrial
companies and during similar activities.
INSTALLATION
55