Idiomas disponibles
Idiomas disponibles
call number and wait until the called party an-
swers.
C
2. Press the
; the call is transferred. If
ONNECT
no-one answers, cancel with
3
R
and take back the first call.
ECOVER
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
E
1. Press
, enter the call number and
NQUIRY CALL
wait until the call is answered.
B
2. Press the
ROKERING
between the callers.
Conference Call
Connects several callers for a conference call. You
are making/taking a call:
E
1. Press
, enter the call number and
NQUIRY CALL
wait until the call is answered.
C
2. Press the
ONFERENCE
3. Add other callers using
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer:
.
BACK
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
M
A
F
>
ENU
CTIVATED
EATURES
D
the function you want.
ELETE
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
them through the cable holders.
3. Insert the expansion key module
2
Aastra M530⁄ M535
ing, snap it into place and plug in the connec-
tion cable and power cord if required.
Notes
• Some function commands of the vocal
3
announcements
are not to apply on this terminal.
• Always disconnect the phone from the mains
first before you connect/disconnect an
2
Aastra M530⁄ M535
• Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.
All manuals and user guides at all-guides.com
2
E
/
ND CALL
to switch back and forth
.
1
E
again.
NQUIRY CALL
C
ALL
S
R
>
and
ELECT
as indicated in the draw-
expansion key module.
Connections
Connecting to the IP network
(Aastra 5380ip only)
Connecting the PC
(only Aastra 5380ip)
Connecting the power supply
(Aastra 5380ip only)
Telephone connection cable
(Aastra 5380 only)
Connecting the handset
Connecting the headset
Connection Aastra M530⁄ M535
pansion key module or power supply
Connecting the Aastra M530⁄ M535
expansion key module
Connection power supply or
or
Aastra M535
Document Designation
-
• Document number: eud-0991 / 1.1
• Valid upwards: Ascotel® IntelliGate® I7.7 / Aastra
5000 R5.1
• © 08.2008
Declaration of Conformity, User's Guide and oth-
/
ESET
er documents can be found at
http://www.aastra.com/docfinder
http://www.aastra.com
2
ex-
2
expansion key module
2
3
.
2
