Welding System Composition - Cebora PW30 Manual Instrucciones

2.3

Welding system composition.

The Cebora PLASMA WELDING System is designed for TIG plasma arc welding. In the full configuration, the system
is made up of a power source, internal cooling unit, a wire feeder (optional), a plasma console and a robot interface
(optional)(fig. 2).
EN
2 Cable connecting plasma console – wire feeder (Item No 2062 optional).
3 Cable connecting power source – CAN2 robot control cabinet (Item No 2063 optional)
4 Power source CANopen cable – Robot control (Item No 2054 optional)
5 Robot control cabinet.
6 Welding wire spool holder (Item No 121 optional)
7 TIG-plasma Torch.
8 Wire feeder (Item No 1649 optional)
10 Welding wire sheath. (Item No 1935 optional)
21 WIN TIG series power source (394.80, 395.80, 396.80, 380.80, 381.80).
22 Cooling unit.
25 Robot interface (Item No 428.XX or Item No 448 optional).
26 Standard cable corresponding to fieldbus used.
30 Plasma console (Item No 465.01).
33 Plasma console – power source – cooling unit extension (Item No 2067).
The robot control interface can be formed in three different ways;
- Via an analog interface Item No 448
- Via a digital interface Item No 428.
- Via a CANopen direct connection (in this case interface (25) and cable (26) are not necessary and only con-
nection Item No 2054 is used).
32/48
fig. 2
3301069/A